more test vm config

.gitignore

@@ -0,0 +1,2 @@
+.qcow2
+result

.sops.yaml

@@ -7,7 +7,7 @@ keys:
    # private key stored in repo, used for test VM
   - &test age1925katzy5gws3f9hnvnlwspu6trxf488arwt6ayw3urg2mgumqhszxnmqh 
 creation_rules:
-  - path_regex: secrets/durian\.yaml$
+  - path_regex: secrets/quitte\.yaml$
     key_groups:
       - pgp:
         - *bennofs
@@ -15,7 +15,7 @@ creation_rules:
         - *felix
         age:
         - *durian
-  - path_regex: secrets\.test\.yaml$
+  - path_regex: secrets/test\.yaml$
     key_groups:
       - pgp:
         - *bennofs

flake.nix

@@ -10,7 +10,7 @@
     let
     in {
       #packages."aarch64-linux".sanddorn = self.nixosConfigurations.sanddorn.config.system.build.sdImage;
-      packages."x86_64-linux".quitte = self.nixosConfigurations.quitte.config.system.build.vm;
+      packages."x86_64-linux".quitte = self.nixosConfigurations.quitte-vm.config.system.build.vm;
       packages."x86_64-linux".default = self.packages."x86_64-linux".quitte;
 
       nixosConfigurations = {
@@ -73,8 +73,8 @@
           system = "x86_64-linux";
           modules = [
             inputs.sops-nix.nixosModules.sops
+            ./hosts/quitte/configuration.nix
             ./modules/base.nix
-            ./modules/sops.nix
             ./modules/keycloak.nix
             ./modules/nginx.nix
             ./modules/hedgedoc.nix
@@ -84,7 +84,7 @@
             "${nixpkgs}/nixos/modules/virtualisation/qemu-vm.nix"
             {
               _module.args.buildVM = true;
-              sops.defaultSopsFile = ./secrets/durian.yaml;
+              sops.defaultSopsFile = ./secrets/test.yaml;
             }
           ];
         };

hosts/quitte-vm/configuration.nix

@@ -0,0 +1,71 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, inputs, ... }:
+
+{
+  imports =
+    [
+      # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # setup NIX_PATH for flakes
+  nix.nixPath = [
+    "nixpkgs=${inputs.nixpkgs}"
+  ];
+
+  # Use the GRUB 2 boot loader.
+  boot.loader.grub.enable = true;
+  boot.loader.grub.version = 2;
+  boot.loader.grub.device = "/dev/sda"; # or "nodev" for efi only
+
+  networking.hostName = "espresso"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Set your time zone.
+  time.timeZone = "Europe/Berlin";
+
+  # The global useDHCP flag is deprecated, therefore explicitly set to false here.
+  # Per-interface useDHCP will be mandatory in the future, so this generated config
+  # replicates the default behaviour.
+  networking.useDHCP = false;
+  networking.interfaces.ens3 = {
+    useDHCP = false;
+    ipv4.addresses = [
+      {
+        address = "141.30.30.150";
+        prefixLength = 25;
+      }
+    ];
+  };
+
+  # enp65s0f0np0^C
+  networking.defaultGateway = "141.30.30.129";
+  networking.nameservers = [ "9.9.9.9" ];
+
+  # allow building for aarch64 (pi) target
+  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "20.09"; # Did you read the comment?
+
+}
+

hosts/quitte-vm/hardware-configuration.nix

@@ -0,0 +1,31 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{ config, lib, pkgs, modulesPath, ... }:
+
+{
+  imports =
+    [
+      (modulesPath + "/profiles/qemu-guest.nix")
+    ];
+
+  boot.initrd.availableKernelModules = [ "ata_piix" "uhci_hcd" "virtio_pci" "sd_mod" "sr_mod" ];
+  boot.initrd.kernelModules = [ "dm-snapshot" ];
+  boot.kernelModules = [ ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" =
+    {
+      device = "/dev/disk/by-uuid/6d8f4b96-4ccb-4a94-a9b1-bab4a28fc940";
+      fsType = "ext4";
+    };
+
+  fileSystems."/boot" =
+    {
+      device = "/dev/disk/by-uuid/58C2-5A6A";
+      fsType = "vfat";
+    };
+
+  swapDevices = [ ];
+
+}

hosts/quitte/configuration.nix

@@ -1,13 +1,8 @@
-# Edit this configuration file to define what should be installed on
-# your system.  Help is available in the configuration.nix(5) man page
-# and in the NixOS manual (accessible by running ‘nixos-help’).
-
 { config, pkgs, ... }:
 
 {
   imports =
     [
-      # Include the results of the hardware scan.
       ./hardware-configuration.nix
     ];
 
@@ -28,80 +23,23 @@
       }
     ];
   };
+
   networking.defaultGateway = "141.30.30.129";
   networking.nameservers = [ "141.30.1.1" ];
 
   networking.hostName = "quitte"; # Define your hostname.
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  # networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
 
   # Set your time zone.
   time.timeZone = "Europe/Berlin";
 
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkbOptions in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-
-
-
-  # Configure keymap in X11
-  # services.xserver.layout = "us";
-  # services.xserver.xkbOptions = {
-  #   "eurosign:e";
-  #   "caps:escape" # map caps to escape.
-  # };
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # sound.enable = true;
-  # hardware.pulseaudio.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.xserver.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  # users.users.jane = {
-  #   isNormalUser = true;
-  #   extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
-  #   packages = with pkgs; [
-  #     firefox
-  #     thunderbird
-  #   ];
-  # };
-
   # List packages installed in system profile. To search, run:
   # $ nix search wget
   environment.systemPackages = with pkgs; [
-    vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+    vim
     wget
     git
   ];
 
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
-  # List services that you want to enable:
-
   # Enable the OpenSSH daemon.
   services.openssh.enable = true;
   services.openssh.permitRootLogin = "yes";

modules/base.nix

@@ -38,7 +38,7 @@
       ../keys/ssh/jannusch-arch
       ../keys/ssh/tassilo
       ../keys/ssh/jonasga
-      ../keys/shh/helene
+      ../keys/ssh/helene
     ];
   };
 

modules/vm.nix

@@ -6,6 +6,7 @@
   ];
 
   users.users.root.hashedPassword = "";
+  users.users.root.initialPassword = "";
   users.mutableUsers = false;
 
   networking.useDHCP = lib.mkForce false;
@@ -14,12 +15,13 @@
   };
   networking.defaultGateway = lib.mkForce null;
 
-  sops.defaultSopsFile = lib.mkForce ../secrets/quitte-vm.yaml;
+  sops.defaultSopsFile = lib.mkForce ../secrets/test.yaml;
   sops.age.sshKeyPaths = lib.mkForce [ ];
   sops.gnupg.sshKeyPaths = lib.mkForce [ ];
-  sops.age.keyFile = lib.mkForce "${../keys/gpg/test.age}";
+  sops.age.keyFile = lib.mkForce "${../keys/test.age}";
   sops.age.generateKey = lib.mkForce false;
 
+
   # don't use production endpoint for test vm, to avoid rate limiting
   security.acme.defaults.server = "https://acme-staging-v02.api.letsencrypt.org/directory";